OutBack 100 A MPPT charge control w/ AFCI

ONLY: $989.85
Item Number: 020-02032

| More

OutBack Power FLEXmax MPPT Charge Controllers

The original maximum power point tracking (MPPT) charge controller, the FLEXmax, increases PV array yield by up to 30% compared to non-MPPT controllers. FLEXmax FM60 and FM80 charge controllers can operate at their maximum rated current in ambient temperatures up to 104 °F (40 °C) and can be used with battery systems from 12 to 60 VDC with PV open-circuit voltage as high as 150 VDC. The controller’s set points are fully adjustable to allow use with a variety of battery types and charging profiles.

FLEXmax FM60 and FM80 controllers come standard with a four-line, 80-character backlit LCD screen that displays PV system performance with a 128-day history and can also be used for programming and monitoring system operation. Both controllers have a programmable AUX relay that can be used for control functions such as battery-enclosure fans, generator starting, or load control. The AUX output is 200 mA at 12 VDC. Use it to power a separate relay with a 12 VDC coil if you need to control more current or to control voltages (AC or DC) other than 12 VDC.

FLEXmax FM100-AFCI MPPT Charge Controller
OutBack Power’s new FLEXmax FM100-AFCI medium-voltage charge controller accepts  higher voltages from PV arrays to allow for longer wire runs with reduced wire sizes. It can be used to charge 24 or 48 VDC battery systems from PV arrays with voltage up to 290 VDC, but can withstand voltages up to 300 VDC without damage. Output is rated at 100 A at 25°C (with deration to 80 A at 40°C), with four-stage charging and an operating temperature range of -20 °C to +60 °C. NEMA 3R design allows for outdoor installation.

The FM100-AFCI employs industry-leading technology to meet the most recent 2017 code compliance with regards to GFDI and AFCI detection and interruption, rapid shutdown, and related disconnecting means. Systems that use the FM100 AFCI require no additional GFDI or AFCI equipment. This makes it the most cost effective, easy to install, and low maintenance controller on the market for NEC 2014 and NEC 2017 compliant systems. Built-in AUX relay has a 12 VDC output of up to 250 mA. 

As the FM100 has no onboard display, an OutBack Power MATE3s or AXS Port MODBUS/TCP interface is required to program this controller and access the 128-day data-logging history, and the programming and monitoring system functions. 

The RTS remote temperature sensor is standard with the FM100-AFCI; and is optional with the FM60 and FM80. FLEXmax charge controls connected to an OutBack inverter system with a HUB can use the system RTS connected to the master inverter. 

All FLEXmax charge controllers are covered by a 5-year standard warranty and are listed to UL 1741 and C22.2 No. 107.1 for the U.S.A. and Canada. The FM100 is also listed for IEC 62109-1.
Length 26.0  IN
Width 12.0  IN
Height 10.0  IN
Weight 22.0  LB
Series FlexMax
Manufacturer Part Number FM100-300VDC-AFCI
Warranty 5-years
Description OutBack 100 A MPPT charge control w/ AFCI
Long Description OUTBACK, FM100-300VDC-AFCI, MPPT CONTROL, 100A 24-48V, GFCI, AFCI, RSD, NEMA 3R
Max Current 100.0
Max Input Voltage 300
Max Power 12VDC 0.0
Max Power 24VDC 3500.0
Max Power 48VDC 7000.0
Arc Fault Protection Integrated AFCI (Listed to UL 1699B)


Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)