Grundfos 25 Sqf-3 Submersible SQFlex Solar Pump

Regular Price: $2,880.00
ONLY: $1,759.85
Item Number: 075-01021

| More


Live Chat Software




Solar Panels .99/watt when purchased with pump.

Solar Panels .99/watt when purchased with pump.



25 SQF-3 SQFlex Solar Pump

Grundfos 25 SQF-3 SQFlex Solar Pump

Whether it's used for livestock watering, a pressure system on a remote cabin, or for irrigation, the SQFlex system can be tailored to meet any requirements. Based on the location, depth to water, and the volume of water required, Grundfos' exclusive sizing program finds the best pump and most efficient energy source for your application. The SQFlex system from Grundfos is not just another solar pump; it's a revolution in remote water supply. Designed for maximum reliability, maintenance-free operation, and the flexibility to adapt to virtually any application, SQFlex provides water wherever necessary and whatever the local conditions. Eleven different pump models cover a wide range of heads and flows to allow pumping at extended depths (820 ft) or at high flow rates (80 gal/min) or anywhere in between, depending on your requirements.

Potential SQ Flex applications include:

Live stock watering
Remote Homes
National/State Parks
Irrigation
Remote Camps
In locations where power is scarce and water is a necessity.
Features of the Grundfos 25 SQF-3 SQFlex Solar Pump:

Dry-Running Protection: This unique feature shuts down the pump if it detects water shortage. Every SQFlex pump comes standard with this sensor pre-installed, protecting the well from being over-pumped and the pump from damage.

Helical Rotor Pump (3"): Designed to pump high levels very efficiently, these models allow pumping levels as deep as 820 ft. The 3 in. diameter allows the pump to go in installations where others can't.

Centrifugal Pump (4"): Based on Grundfos' 40 years of experience in submersible pumps, these models are capable of providing high flows, up to 80 gal/min, at moderate heads.

Materials: All Stainless steel for long pump life.

Motor: Only one motor size covers the entire pump range. Designed for peak efficiency and complete reliability, the motor features integrated electronics, eliminating the need for complicated external controls.

Motor Protection: Built in protections against over-temperature, overload, and over and under-voltage for reliability, as well as two-way communication with a control box to alert you in case there's a problem.

Any Voltage: The motor can operate under any voltage from 30 - 300 VDC and 90 - 240 VAC without additional controls, making sizing and installation easy, even as a retrofit to existing installations. AC power capabilities mean every SQFlex pump has the ability to use an AC generator for backup power.

Simple installation
Reliable water supply
Virtually no maintenance
Cost-efficient pumping every day!

Also Known As:
25.SQF-3
25-SQF-3
25_SQF-3
25SQF-3

Technical Data SQF Pump
Power supply to pump 30-300 VDC, PE.
1 x 90-240 V 10%/+6%, 50/60 Hz, PE.
Run-up time Depends on the energy source.
Start/stop No limitation to the number of starts/stops per hour.
Enclosure class IP 68.

Motor protection
Built into the pump. Protection against
dry running by means of a water level electrode
overvoltage and undervoltage
overload
overtemperature.

Conductivity 70 s/cm (micro siemens).
Sound pressure level
The sound pressure level of the pump is lower than the limiting values stated in the EC Machinery Directive.
Radio noise The SQF complies with the EMC Directive 89/336/EEC. Approved according to the standards EN 61000-6-2 and EN 61000-6-3.
Reset function The SQF can be reset via the CU 200 or by disconnecting the power supply for 1 minute.
Power factor PF = 1.
Operation via generator Voltage: 230 VAC 10%/+6%.

The generator output must be
minimum 1000 W (helical rotor pumps)
minimum 1500 W (centrifugal pumps).

Earth-leakage circuit breaker If the pump is connected to an electric installation where an earth-leakage circuit breaker (ELCB) is used as an additional protection, this circuit breaker must trip out when earth fault currents with DC content (pulsating DC) occur.

Borehole diameter 3 SQF, 6 SQF, 11 SQF: Minimum: 3 in.
16 SQF, 25 SQF, 40 SQF, 60 SQF: Minimum: 4 in.
Installation depth

Minimum: The pump must be completely submerged in the pumped liquid. Maximum: 500 ft below the static water table (220 psi).
Suction strainer

Holes of the suction strainer: 3 SQF, 6 SQF, 11 SQF: ø0.090 in.
16 SQF, 25 SQF: ø0.10 in.
40 SQF, 60 SQF: 0.16 in x 0.80 in.
Pumped liquids pH 5 to 9. Sand content up to 50 ppm.
Marking CE.
Pump Type: Helical Rotor

CLICK HERE FOR SPEC Sheet


Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)