|
|
OutBack Mate2 System Controller and Display
The MATE system display and controllers are complete management tools for your OutBack Power system. Through the use of a single MATE you can remotely manage and monitor multiple inverter/chargers, MX60s and any future OutBack power conversion and control products. The MATE and MATE2 are packed full of features to make system management simple. The easy-to-read 3.1" (8 cm) LCD is backlit for dark operating conditions. Four soft keys allow easy context-based navigation of menus and functions. Two hot keys give immediate access to AC and inverter functions. A built-in clock and calendar function enables timer based programming of inverter and charger operation. This permits you to set the system to work with time-of-day power rates or to limit a generators run time to a specific time period of the day or week. All of your settings are stored in permanent memory to eliminate the need to reprogram in the event of a system shutdown or battery replacement. The MATE and MATE2 include a RS232 port with DB9 jack for connection to the serial port of a PC computer. Through the use of optional WinVerter software you can perform such operations as data logging and graphical display of the systems operation and performance.
- Simple system management
- Four soft keys allow easy context-based navigation of menus and functions
- Built-in clock and calendar function
- Two hot keys give immediate access to AC and inverter functions
MATE Specifications
|
|---|
| Grey MATE |
Surface mount with RS232 |
| Black MATE_B |
Surface mount with RS232 |
| Black MATE2 |
Flush mount without RS232 |
| Interface Display |
3.1" (8 cm) backlit LCD - four line, 80 alpha numeric characters |
| Control Keypad |
6 backlit silicone keys - dedicated inverter and AC input keys |
| Status Indicators |
Two LED Status Indicators - AC input (yellow), inverting (green) |
| Communication Protocol |
Proprietary OutBack Multi-drop using an OutBack HUB4 or HUB10 |
| Interconnection Cabling |
Standard CAT 5 network cable with RJ45 modular jack - 10' (3 m) included |
| PC Computer Interface |
RS232 opto-isolated DB9 jack 9600 baud serial communication |
| Microprocessor |
16 MHz low power consumption version |
| Setpoint and Data Memory |
32K non-volatile flash RAM |
| Clock / Calendar |
On-board real time clock with battery backup |
| Environmental Rating |
Indoor Type 1 |
| Maximum Cable Length |
1000' (300 m) |
| Warranty |
Standard 2 year / Optional 5 year |
| Shipping Weight |
1 lb (.5 kg) |
| Shipping Dimensions |
5.75 x 4.25 x 2" (15 x 11 x 5 cm)
|
Outback Communications Controller For Flexware, Black Flush Mount Case, Mate2
|
|