Sunny Boy SB700
The SB700 has a 120 VAC output and three different configurable input voltage ranges. The 120 volt output allows it to be used on 120/240 VAC systems as well as 208 VAC systems. Evergreen ES-A modules and typical 60-cell grid-tie modules cannot be used with this inverter because their voltage is too low to reach the MPPT voltage of this inverter before exceeding the maximum wattage allowed. It can be used with SANYO modules and with 36-cell and 72-cell modules. The SB700 is housed in a completely sealed stainless steel enclosure. Outdoor installation is recommended for the sealed inverters so natural air-flow can cool the heat-sink.
The Sunny Boy SB 700 is one of the most sophisticated and high quality inverters on the market. Featuring German engineering the inverter will help to achieve the optimum match between the solar generator's output power and the inverters input power.
The compact SB 700 inverter has proven particularly successful with more than 30,000 units sold worldwide. Packed full of innovative technologies, this Sunny Boy also features the international SMA grid guard interface. This ensures maximum reliability when operating the solar power system and enables electricity to be fed into mains grids anywhere in the world.
The inverter features an easy plant design for reduced installation costs, this inverter is the solution for your solar panel grid connect system.
Product Description
The Sunny Boy SB 700 is the perfect grid connect inverter for a 780W solar installation. It is easy to install which will help to reduce your installation costs and it is one of the most efficient on the market. Join the solar revolution today with the Sunny Boy SB 700. The Inverter features an LCD display which by simply tapping turns on to show you, your solar systems output.
Use the SB 700 for small starter systems, educational, or demonstration projects. Field configurable for three output power ranges, this small inverter will allow a PV installation with as few as three solar modules. It's great to fill tight spaces, or as a solution for challenging roof topologies.
Just like every other Sunny Boy Inverter the SB 700 can be configured for all of the communications options available. Which means you can combine them with any other SMA inverter and access the data in one central location. As an added advantage, the SB 700 has a new control board that allows for any remote communications option to be used simultaneously with the Sunny Boy Display!
Features
- Easy plant design and reduced installation costs
- SMA grid guard(MSD)
- Diagnosis and communication via Power line Communication,radio transmission or via data cable (RS232 or RS485)
- Extended temperature range -25 ?C to +60 ?C
- For outdoor and indoor installation
- Connection on the AC- and DC-side with connectors
- Surge voltage protection with integrated thermally monitored varistors
- Exceptional reliability and energy capture ratio
- German Engineering
Warranty
- 5 Year Comprehensive Warranty Standard
- Extended 10 Year Warranty Optional ($600 Extra)
Technical Specifications
| Input Data |
| Max DC power
|
510W / 670W / 780W
|
| Max DC voltage
|
150V / 200V / 250V
|
| PV voltage range, MPPT
|
73V-120V / 96V-160V / 119V-200V
|
| Max input current - Ipv
|
7A
|
| DC voltage ripple - Upp
|
<10 %
|
| Max number of strings(parallel)
|
2
|
| DC isolator
|
Connectors
|
| Thermally monitored varistors
|
Yes
|
| Ground fault monitoring
|
Yes
|
| Reverse polarity protection
|
Short circuit diode
|
| Output Data |
| Max AC power
|
460W / 600W / 700W
|
| Nominal AC output
|
460W / 600W / 700W
|
| THD of AC current
|
<3 %
|
| Nominal AC voltage
|
220 - 240V
|
| Nominal AC frequency
|
50Hz / 60Hz
|
| Power factor
|
1
|
| Short circuit proofing
|
Yes, current control
|
| Grid connection
|
AC plug connector
|
| Efficiency |
| Max efficiency
|
93.4 %
|
| Euro ETA
|
92 %
|
| Protection Rating |
| In accordance with DIN EN 60529
|
IP65
|
| Mechanical Data |
| Dimensions
|
322W x 290H x 180D mm
|
| Weight
|
16 kg
|
* Optional external fan (Sunny Breeze) available
** Jumper setting adjustable
Quality and Safety
-
Compliance UL 1714, E210376,UL 1998, IEEE 519, IEEE 929, ANSI C62.41 C1&C3, FCC part 15 A & B